Encrypting your link and protect the link from viruses, malware, thief, etc! Made your link safe to visit.

 

Question:


Develop a ladder logic program that will allow you to fill two tanks with water by a pump, as it is shown below (Using Triologi ). The pump is operating manually by a push-button “Start” (normally open) and also has a push-button for “Stop” (normally closed). When the first tank becomes full, the circuit should automatically start to fill the second tank by closing the first valve, and opening the second valve, and when the second tank is full, the pump disconnects automatically and a “sign lamp” is turned on to show that the 2nd tank is full. The two float switches are both normally open.


Answer:



85bdc3dcf70244ee894558a7ecb617e7-YYm9k-RSAYOxaz-F42-0

ST

Search This Blog

Labels

Report Abuse

Question: A 250-V, 4-pole, wave-wound d.c. series motor has 782 conductors on itsarmature. It has armature and series field resistance of 0.75 ohm. The motor takesa current of 40 A. Estimate its speed and gross torque developed if it has a flux per pole of 25 mWb Answer: Step 1 Mechanical Engineering homework question answer, step 1, image 1 Mechanical Engineering homework question answer, step 1, image 2 Step 2 Mechanical Engineering homework question answer, step 2, image 1 Step 3 Mechanical Engineering homework question answer, step 3, image 1

Question: A 250-V, 4-pole, wave-wound d.c. series motor has 782 conductors on itsarmature. It has armature and series field resistance of 0.75 ohm. The motor takesa current of 40 A. Estimate its speed and gross torque developed if it has a flux per pole of 25 mWb Answer: Step 1 Step 2 Step 3

QUESTION 6 (a) The bar shown in Figure Q2(a) is subjected to tensile load of 150 Kn. If the stress in the middle portions is limited to 160 N/mm², determine the diameter of the middle portion. Find also the length of the middle portion if the total elongation of the bar is to be 0.25 mm. E E = 2.0 + 105N/mm². (12 marks) 150 KN 10 cm DIA 10 cm DIA 150 KN 45 cm Figure Q6(a) (b) A brass bar, having cross-section area of 900 mm², is subjected to axial forces as shown in Figure Q2(b), in which AB = 0.6 m, BC = 0.8 m, and CD = 1.0 m. Find the total elongation of the bar. E = 1.0 + 105N/mm2 . (8 marks) Page 4 of 5 B D 40 KN 70 KN 20 KN 10 KN Figure Q6(b) (TOTAL = 20 MARKS)

  Question: Show transcribed image text Answer:

Contributors